RENEWABLE ENERGY STOCKS

The energy generation and supply industry has traditionally been dominated by coal-, oil- and gas-powered plants that supplied the electricity needed by homes, offices and factories. When burning these materials to produce electricity, there is a high amount of CO2 and other gases that are released into the atmosphere that are detrimental to the health of people as well as the ecosystem of our planet. They are also non-renewable, meaning that we will, at one point run out of them, so even if they were completely harmless, we would need to switch over from them eventually.
Fortunately, we have technologies that can help us with this transition, including solar (photovoltaics and concentrated solar power), wind, hydro, geothermal and biomass among others. We decided not to include nuclear power in our list, as there are constant discussions as to whether it can be considered green (because of the nuclear waste it produces) and is not renewable (our uranium fuel supply is not limitless).
You will also find companies that work on making all of electricity generation, distribution and transport more efficient on our list, as we do not have to worry about where the electricity is generated if it does not need to be generated at all.
One of the biggest challenges that we face with this transition is the ability to store energy. As solar PV and wind power are becoming the most dominant sources of electricity in this new mix, we have to take into account that they generate electricity based on weather conditions. Our storage section explains the available options.
We also included utility companies that operate primarily (and in most cases exclusively) green energy generation technologies.

Clean Energy ETFs

Ticker	Name
TAN	Invesco Solar ETF
FAN	First Trust Global Wind Energy ETF
ICLN	iShares Global Clean Energy ETF
QCLN	First Trust NASDAQ Clean Edge Green Energy Index Fund
LIT	Global X Lithium & Battery Tech ETF
BATT	Amplify Advanced Battery Metals and Materials ETF

Generation equipment

Solar energy stocks

Solar PV is what is mostly referred to by people when talking about solar panels that generate electricity. Solar Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials. (For CSP - Concentrated Solar Power - refer to the corresponding section below)
The basis of a system is the solar cell. The cell is the base building block that is capable of generating electricity from light. Manufacturers use different materials to make the cell, but the most common of these by far is silicon. In order to be able to install these on a rooftop (or a field, etc.), cells need to be arranged into modules (panels).
These systems are made up of:

Solar cells
Wiring to connect the cells and the modules so that there is a single access port to all of the electricity they generate.
Inverters are required to convert the DC (direct-current) power the panels generate into AC (alternating-current) that the electrical grid and most of our appliances use. Inverters and power optimizers also make sure that the maximum amount of power is generated and that the system can be shut down in case of failures by controlling the characteristics of cells.
Mounts and racking to be able to attach the panels to a roof or position them in a field

The following types of companies take part in the process:

Suppliers provide the raw material for cells (mostly polysilicon)
Solar cell manufacturers produce the cells
Component manufacturers provide the inverters/power optimizers, mounting equipment, cabling, monitoring and sun tracking systems, etc.
Residential, commercial installers and power utility companies deploy the modules and operate (or provide support for) the systems

In practice, a lot of the cell manufacturers take part in assembling the modules and even installing them.

Wind energy stocks

A wind turbine, or alternatively referred to as a wind energy converter, is a device that converts the wind's kinetic energy into electrical energy.
The smallest turbines are used for applications such as battery charging for auxiliary power for boats or caravans or to power traffic warning signs.
The bigger ones are used in wind farms, that consist of many individual wind turbines connected to the electric power transmission network.
Onshore wind farms are inexpensive, but have an impact on the landscape, as typically they need to be spread over more land than other power stations and need to be built in wild and rural areas, which can lead to the "industrialization of the countryside" and habitat loss.
Offshore wind is steadier and stronger than on land and offshore farms have less visual impact, but construction and maintenance costs are considerably higher.
Wind turbine manufacturers use different materials to design the structure and blades, most importantly glass fiber and carbon fiber.
We have included a section for companies that supply materials (mainly carbon fiber) to wind turbine manufacturers, but please note that in most cases this makes up only a small part of the operations of these companies.
Also, other than Vestas Wind Systems and Siemens Gamesa Renewable Energy, all organizations listed as manufacturers are conglomerates, where most of their revenue is derived from other sources.

Hydro, CSP, geothermal, biomass and marine

Hydropower is power derived from the energy of falling or fast-running water. It has been around for a very long time and today accounts for roughly 15% of total world electricity production, which makes it by far the biggest source of renewable energy we have today. Hydro power plants can provide the base load energy required by countries, as the amount of electricity produced by the plants can be adjusted as needed.
Geothermal energy is thermal energy generated and stored in the Earth. This can be extracted and used for heating or for electricity production. This type of power generation is mostly restricted to places where sufficient heat energy can be extracted without having to drill very deep.
Biomass plants burn organic waste to produce electricity. Unlike most other sustainable sources of energy, a biomass power plant is not dependent on geography and waste is easy to come by anywhere.
CSP (Concentrated Solar Power) may be the latest of these solutions. These systems generate solar power by using mirrors or lenses to concentrate a large area of sunlight onto a receiver. There, it generates heat which can be used to power a turbine, which then produces electricity. Because of the amount of concentrated heat that is needed, only utilities build big farms and serve large areas with a single plant.
Marine power includes technologies that harvest wave and tidal energy.
We decided to put all of these technologies into the same list, as the main technology used in these is a generator and so if a company has expertise in designing electrical generators, then they are usually involved in most of these on some level.

Energy storage

Energy storage is the capture of energy produced at one time for use at a later time. There are countless solutions that store energy and have been used for some time now (like pumped hydro, flywheels, etc.), but most of them have not proven economically feasible for large scale energy storage. A few of these solutions have been deployed, but not in large enough quantities for these to make up any meaningful contribution to the revenues of bigger corporations. In most places still, if backup power needs to be provided, diesel generators are used. In this section we included two technologies that are becoming more and more widespread, lithium-ion batteries and fuel cells.

Batteries and lithium stocks

Li-ion battery technology is not a new invention, but it has been gaining popularity as its price has been declining rapidly.
Batteries store electrochemical energy, which can then easily be converted into electricity. Multiple types of batteries have existed for more than two centuries and have been used in appliances.
The typical battery has been small, just big enough to power our portable electronic devices, at maximum jump start car engines and power the radio.
But as photovoltaics, wind power and battery-electric vehicles started gaining popularity, the need for bigger and more efficient batteries has become stronger. As a consequence of investments in this field, the price of lithium-ion batteries has been steadily dropping, decreasing by 85% from 2010 to 2018.
The Battery and battery parts manufacturing section lists companies that manufacture batteries, other parts that are required in the manufacturing process or are working on promising new battery technologies.
In our Lithium supply list, we mostly included organizations that operate mines, and a substantial amount of their revenues come from mining and/or refining lithium.

Fuel-cells

A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (mostly hydrogen) and an oxidizing agent (mostly oxygen) into electricity.
They have been used to power satellites, provide back-up power to whole buildings, network infrastructure and lately in cars and trucks as well.
We decided to include only one vehicle manufacturer (Nikola Corporation), as basically all of the notable car companies have put money into researching FCEVs (Fuel Cell Electric Vehicles) and most of them have even built production vehicles, but it still makes up only a fraction of their revenues.
The companies in the fuel-cell ecosystem include:

Vehicle manufacturers
Fuel-cell manufacturers
Hydrogen producers
Companies that transport the hydrogen and operate fueling stations

In some cases, these activities are performed by the same company, as on-site production technologies already exist (where the fuel-cells are located and where the hydrogen will be used).

Efficiency/Smart grid

A big challenge in the transition to a new-energy era is the way the power grid has been designed. For a very long time, electricity has been generated centrally in huge power plants and then distributed over long distances to towns and businesses.
With the rise of photovoltaics, wind, etc. it became possible to create smaller "plants" on the top of office buildings, even individual homes. Electricity generation is now becoming more decentralized, turning increasingly more consumers into producers. This requires the grid to be more flexible, to be "smarter" in how it distributes power, as it is no longer a one way exchange.
The fact that batteries are also becoming commonplace in individual homes, introduces the possibility of connecting these appliances to the grid and discharging them at the most suitable times.
In this section we are listing companies that manufacture appliances, write software or are involved in a meaningful way in making the power grid and electricity consumption more efficient.

Utilities

Electric utilities operate power plants that generate electricity and sell that electricity to consumers.
These companies usually have lower growth rates, but very stable, consistent operations and usually distribute most of their earnings as dividends.

Renewables

In this section we only included companies that make their living from the operation of sustainable generation technologies like the technologies listed above.
Some of them may operate a gas or oil power plant, but we tried to exclude any companies that do not seem serious about turning much of their portfolio into green assets.

Waste-to-energy

Waste-to-energy or energy-from-waste is the process of generating energy in the form of electricity and/or heat from the primary treatment of waste, or the processing of waste into a fuel source. Most Waste to Electricity processes generate electricity and/or heat directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels. Electricity that is produced this way does not need to be generated from other sources, like coal, oil, etc. and waste in these plants is incinerated, so it does not need to be landfilled and does not get into the oceans and forests.
This section mostly includes companies that operate these incineration and generation plants.

Data sources for charts

iO Charts ei ota mitään vastuuta tämän sivuston sisällön virheistä tai puutteista. Sivuston sisältämät tiedot on annettu ilman takuita täydellisyydestä, tarkkuudesta, hyödyllisyydestä tai ajantasaisuudesta. Huomaa myös, että kaikki tekemäsi toimet tällä verkkosivustolla annettujen tietojen perusteella tapahtuvat täysin omalla vastuullasi. Tämä verkkosivusto on tarkoitettu käytettäväksi ja sitä tulee käyttää vain tiedotustarkoituksiin, ja sinun tulee pyytää riippumatonta taloudellista neuvontaa ammattimaiselta ja tutkia ja tarkistaa itsenäisesti kaikki, mitä näet sivustolla.